Changes

Jump to navigation Jump to search
2,345 bytes removed ,  12:52, March 29, 2017
→‎How To Make Soap: Rewrote as requested
Line 5: Line 5:     
== How To Make Soap ==
 
== How To Make Soap ==
{{Rewrite|it is written in the second person}}
+
Soap is used every day, but real soap has become hard to find and many crafters have started making their own.
We use soap every day, but many people don’t realize that most commercial “soap” is actually made of harsh detergents that can irritate and dry out their skin.  Since real soap has become hard to find, many crafters have started making their own.  Soapmaking is easy to learn, and few things are more rewarding than taking a bath or shower with a bar of soap you made yourself.
   
 
Many soapmaking tools are common kitchen items.  You will need a one-gallon stainless steel or enamel pot, a large heat proof pitcher, a small bowl, wooden or plastic spoons, two thermometers, and rubber gloves.  Do not use any utensils for food preparation after you have made soap with them.  You will also need safety goggles, a plastic container with a lid to use as a mold, (baby wipe containers work very well), and an old bath towel.  The final and most expensive piece of equipment is an accurate scale. A digital scale which has a tare feature and measures in ounces is best.
+
Many soapmaking tools are common kitchen items.  To make soap, one needs a one-gallon stainless steel or enamel pot, a large heat proof pitcher, a small bowl, wooden or plastic spoons, two thermometers, and rubber gloves.  One should not use any utensils for food preparation after making soap with them.  One also needs safety goggles, a plastic container with a lid to use as a mold, (baby wipe containers work very well), and an old bath towel.  The final and most expensive piece of equipment is an accurate scale, a digital scale which has a tare feature and measures in ounces is best.
+
 
To make two pounds of mild castile soap, you will need 1.5 pounds of olive oil, 1 ounce of beeswax pearls, 4 ounces of lye (available at most hardware stores where it is sold as a drain cleaner), 10 ounces of distilled water, a small amount of vegetable shortening, and any scents or colorings you wish to add(Only use scents and pigments intended for use on the skin).
+
Two pounds of mild castile soap can be made with 1.5 pounds of olive oil, 1 ounce of beeswax pearls, 4 ounces of lye (available at most hardware stores where it is sold as a drain cleaner), 10 ounces of distilled water, a small amount of vegetable shortening, and any scents or colorings.  The lye is dangerous, and some recommend keeping a supply of white vinegar on hand to neutralize it should it come in contact with skin.
+
 
Put on long sleeves, long pants, your goggles, and gloves.  If you have long hair, tie it back.  Keep a bottle of white vinegar on hand, and if any lye comes in contact with your skin, douse the area with vinegar, which, being highly acidic, neutralizes the alkaline lye.
+
Making soap with this recipe can be done in a series of steps:
+
*Place the ounce of wax in the olive oil and heat them to 120<sup>o</sup>F.
Place your pot on the scale and record how much it weighs so you will be able to subtract its weight later, or if your scale has a tare feature, press the tare button and the scale will reset to zero.  Slowly pour the olive oil into the pot until the scale reads 1.5 pounds. Remember to subtract the pot’s weight if the scale does not have a tare feature.  Add one ounce of beeswax.  Heat the beeswax and oil to 120<sup>o</sup>F and set the pot aside.
+
*Pour the lye into the pitcher of water and stir to dissolve the crystals.  This releases dangerous fumes.
+
*Wait until the second mixture cools to 120<sup>o</sup>F.
Weigh 10 ounces of water in the pitcher.  Remove the pitcher from the scale and weigh 4 ounces of lye in the small dish.  Be very careful because lye can cause severe burns.  Slowly pour the lye in to the water, stirring to dissolve the crystals.  Don’t pour the water onto the lye or they will react violently.  The water and lye will heat up to a high temperature.  Be careful not to breathe the fumes coming from the solution. Use the second thermometer to measure the lye and water mixture’s temperature.  Wait until the solution cools to 120<sup>o</sup>F.
+
*Grease a soap-bar-shaped contained with vegetable shortening and line it with freezer paper or a plastic garbage bag
+
*Mix the lye solution with the oil solution and continue stirring
As the lye is cooling, grease the container you are using as a mold with vegetable shortening, and put a piece of freezer paper on the bottom.  Some soapmakers prefer to line the mold with a plastic garbage bag.  Both methods work well, so use whichever one is easier for you.  If you use a garbage bag, make sure it lies flat in the mold so your soap will be smooth.
+
*Test this mixture to ensure that when a spoonful of this mixture drips from a spoon, it leaves a small bump on the surface
+
*Add scents and colorings
When the lye solution cools to 120<sup>o</sup>F, slowly add it to the pot of oil and beeswax while stirring briskly.  Continue stirring the soap until it begins to thicken.  Occasionally test the soap’s thickness by scooping up a little soap and allowing it to drip off a spoon into the soap mixture.  When the soap leaves a small bump on the surface of the solution before sinking back in, the soap has reached the stage called “trace”.  If you are adding scents or colorings to your soap, add them at this point, and stir them in thoroughly.
+
*Pour the soap into the mold, wrap the mold in a towel, and leave it alone for 18 hours
+
*Remove it and allow it to "cure" for a day or two, as it is still caustic, then slice it into bars
Pour the soap into the mold and put the lid on the container.  Wrap the mold in the towel and put it in an undisturbed area for 18 hoursRemove the towel and leave the soap for another two hours.  Put on your gloves and turn the soap out of the mold.  The soap still needs to cure and may be mildly caustic.  Let the block sit for a day or two before you slice the soap into bars.  Once you have sliced the bars, put them in a well ventilated box so that they do not touch each other and leave them for two weeks or longer.  The longer the soap cures, the harder and milder it will be.
+
*Keep said bars in a ventilated box for 1-2 weeks
  −
Your soap is now ready to use.  Try to keep your homemade soap out of the stream of the shower if possible.  This will help the bar to last longer.
      
[[Category:Health]]
 
[[Category:Health]]
Block, SkipCaptcha, Automoderated users, edit
1,942

edits

Navigation menu