Prior to the commercial use of the [[GPS]] (Global Positioning System), the most common navigational system in use for international passenger flights was the [[Inertial Navigation System]] (INS). Whereas the LORAN ([[Long Range Navigation]]) system used navigational aids external to the aircraft ("master" land station and two or more "slave" stations transmitting low or medium intersecting signals), INS was entirely internally based using gyroscopes and accelerometers (which detect changes in an aircraft's motion in any direction in reference to the gyroscopic lines) which minutely and continuously (seven times a second) adjusted through the automatic pilot the aircraft in flight - taking into account the changing wind, velocity, weight and other conditions. An aircraft using INS was guided by preflight insertion of up to nine navigational "waypoints". If more were need, number 10 and subsequent were inserted during the flight replacing entries overflown and "vacated". Three independent but electrically linked INS units were generally installed in a passenger plane - two active and "'redundant" with displays for pilot and co-pilot and one "hot spare". | Prior to the commercial use of the [[GPS]] (Global Positioning System), the most common navigational system in use for international passenger flights was the [[Inertial Navigation System]] (INS). Whereas the LORAN ([[Long Range Navigation]]) system used navigational aids external to the aircraft ("master" land station and two or more "slave" stations transmitting low or medium intersecting signals), INS was entirely internally based using gyroscopes and accelerometers (which detect changes in an aircraft's motion in any direction in reference to the gyroscopic lines) which minutely and continuously (seven times a second) adjusted through the automatic pilot the aircraft in flight - taking into account the changing wind, velocity, weight and other conditions. An aircraft using INS was guided by preflight insertion of up to nine navigational "waypoints". If more were need, number 10 and subsequent were inserted during the flight replacing entries overflown and "vacated". Three independent but electrically linked INS units were generally installed in a passenger plane - two active and "'redundant" with displays for pilot and co-pilot and one "hot spare". |