Changes

Jump to navigation Jump to search
5,298 bytes added ,  04:36, January 21, 2010
→‎Double and Triple Integrals: More material, rough draft, will look at it.
Line 31: Line 31:     
=Double and Triple Integrals=
 
=Double and Triple Integrals=
−
The first thing we do is develop more sophisticated ways of measurin areas of plane figures.  Ordinary integration can give us the area of a figure with a straight horizontal bottom edge, straight vertical left and right edges, and an arbitrary function giving the top edge.  Suppose we have a circle of radius R centered at (A, B), as shown in the figure at the right.
+
 
−
[Will make the figure once we agree that I'm on the right track here -- SamHB] (We have placed the circle completely in the upper-right quadrant so that we won't have to deal with visualizing negative areas—this is just for illustrative purposes.  The technique works in all cases.)
+
We will not give rigorous proofs of the various theorems here.  Such proofs are taught in college-level analysis and differential geometry courses, and often dwell upon esoteric issues of singularities and infinities.
 +
 
 +
The first thing we do is develop more sophisticated ways of measuring areas of plane figures.  Ordinary integration can give us the area of a figure with a straight horizontal bottom edge, straight vertical left and right edges, and an arbitrary function giving the top edge.  Suppose we have a circle of radius R centered at (A, B), as shown in the figure at the right.
 +
[[File:Dblintegral.jpg|thumb|The blue area is the first integral, and the blue and yellow areas combined are the second integral.]]
 +
(We have placed the circle completely in the upper-right quadrant so that we won't have to deal with visualizing negative areas—this is just for illustrative purposes.  The technique works in all cases.)
    
The blue area is given by:
 
The blue area is given by:
Line 71: Line 75:  
This use of double integrals to calculate areas may seem like excessive make-work, and using "1" as the integrand may seem boring, but this sort of analysis is the basis for everything we will do.
 
This use of double integrals to calculate areas may seem like excessive make-work, and using "1" as the integrand may seem boring, but this sort of analysis is the basis for everything we will do.
   −
[Next: point out that the order could have been different, paying careful attention to just how the limits of integration are set, and that Fubini's theorem says that the result is the same.  Probably not worth proving.  There are lots of things we don't prove, relying on students' intuition, which is very important in this subject.]
+
We could have performed the double integration in the other order, dividing the circle into horizontal strips first, and then subdividing those, so that dx is the "inner" integral and dy the "outer" one.  This would have gotten the same result.  The theorem that says that this is so is ''Fubini's theorem''.  Proving it is outside the scope of this course, or of conservapedia.
 +
 
 +
Now, given that Fubini's theorem says that the order of the integrations doesn't matter, we can "abstract away" that order, say that we are really just "integrating over a region", and use a more abstract notation.  Once we have defined a 2-dimensional region R, we can just write two successive integral signs with the subscript R instead of the written-out limits of integration, and use the symbol "dA" to mean "infinitesimal piece of area".  (Recall that "dx" means, in an informal way, "infinitesimal bit of length".)  The integral would look like:
 +
::<math>\iint_{R}\ 1\ dA</math>
 +
or, more generally:
 +
::<math>\iint_{R}\ f(r)\ dA</math>
 +
where r is some way of indicating a point in the region.  We will always use a coordinate system, so, for example, if we are using polar coordinates, the integral might look like:
 +
::<math>\iint_{R}\ f(r, \theta)\ dA</math>
 +
 
 +
For triple integrals over a volume, we do something similar:
 +
::<math>\iiint_{R}\ f(r, \theta, \phi)\ dV</math>
 +
 
 +
The symbols dA and dV are often called the "area element" and "volume element", respectively.
 +
 
 +
==Change of Variable==
 +
The change-of-variable theorem is an extremely important tool of integral calculus.  It is even more important in multivariate calculus, since it is central to the concepts of coordinate systems and coordinate system change operations.  It is implicit in nearly all integrals over curves, surfaces, and volumes.
 +
 
 +
We would like to be able to perform the integrations of the previous section in coordinate systems other than plain Cartesian coordinates.  For example, the integral to find the area of a circle would be easier to set up if we were using polar coordinates, because a circle is trivial to describe in polar coordinates.  To do this, we need to revisit the change-of-variable theorem from elementary calculus, and extend it to higher dimensions.
 +
 
 +
Basically, the change-of-variable theorem of elementary calculus says that algebraic substitution and manipulations actually work, even when the manipulations involve the "d" symbol.  (Remember that things like "dx" are ''infinitesimals''; their actual value would have to be considered to be zero.  By a miracle of calculus notation, we can manipulate them anyway.)
 +
 
 +
Here is a simple example, not (yet) involving integrals.  Suppose u is a function of y, and y is a function of x, as follows:
 +
::<math>y = \log u</math>
 +
::<math>u = \sin x</math>
 +
We know that
 +
::<math>\frac{dy}{du} = \frac{1}{u}</math>
 +
::<math>\frac{du}{dx} = \cos x</math>
 +
Can we get <math>\frac{dy}{dx}</math> from this?  The change-of-variable theorem says that we can multiply the derivatives and "cancel" the du:
 +
::<math>\frac{dy}{dx} = \frac{dy}{du} \frac{du}{dx} = \frac{1}{u}\ \cos x</math>
 +
We can remove u from this, getting the answer in terms of x:
 +
::<math>\frac{dy}{dx} = \frac{\cos x}{\sin x} = \cot x</math>
 +
This is the same answer as the [[chain rule]] would have given:
 +
::<math>y = \log (\sin x)</math>
 +
::<math>\frac{dy}{dx} = \frac{1}{\sin x} \cos x</math>
 +
It's easy to see why this is true&mdash;the multiplication in the chain rule is just the multiplication from which we canceled the dy.
 +
 
 +
We can do the same ting for integrals, observing why the "dx" symbol in an integral is such an important part of the notation that integrals use.  Given:
 +
::<math>\int \cot x\ dx</math>
 +
we introduce a new variable u:
 +
::<math>u = \sin x</math>
 +
so the integral is
 +
::<math>\int \frac{\cos x}{u} dx</math>
 +
We have
 +
::<math>\frac{du}{dx} = \cos x</math>
 +
So, taking the usual liberties with the notation:
 +
::<math>dx = \frac{du}{\cos x}</math>
 +
so the integral is:
 +
::<math>\int \frac{\cos x}{u} \frac{du}{\cos x} = \int \frac{du}{u} = \log u = \log \sin x</math>
 +
Tricks like this are staples of integration technique.
 +
 
 +
What we have really done is a change of coordinate system.  Whenever we change coordinate systems while calculating integrals, we are actually using the change-of-variable theorem.
 +
 
 +
Now consider what happens when we try to change the previous integral over a circle in Cartesian coordinates to the equivalent integral in polar coordinates.  The earlier integral was:
 +
::<math>\int_{-R}^{R}\int_{-\sqrt{R^2 - x^2}}^{\sqrt{R^2 - x^2}}\ 1\ dy dx</math>
 +
That would change to:
 +
::<math>\int_{0}^{2\pi}\int_{0}^{R}\ 1\ ?? dr d\theta</math>
 +
The limits of integration are, as expected, easy to set up.  But we need something that is the equivalent of
 +
::<math>\frac{d x, y}{d r, \theta}</math>
 +
to use as the coordinate-change multiplier.
 +
 
 +
The multiplier to use is called the ''[[Jacobian]]'' of the coordinate change.  It is the [[determinant]] of the matrix of partial derivatives.  That matrix is:
 +
 
 +
::<math>\begin{pmatrix} \frac{\partial x}{\partial r} & \frac{\partial x}{\partial \theta} \\ \frac{\partial y}{\partial r} & \frac{\partial y}{\partial \theta}\end{pmatrix}</math>
 +
 
 +
The Jacobian is written <math>J(x, y / r, \theta)</math>.  Working out the derivatives and the determinant, its value in thsi case is r.
   −
[Next, point out that, given Fubini, we can abbreviate integrals, just saying "double integral over region R", and giving "dA" or "dV" as a euphemism for dx xy dz.]
+
So the area of a circle is:
 +
::<math>\int_{0}^{2\pi}\int_{0}^{R}\ 1\ J(x, y / r, \theta) dr d\theta = \int_{0}^{2\pi}\int_{0}^{R}\ r dr d\theta = \int_{0}^{2\pi}\frac{R^2}{2} d\theta = \pi R^2</math>
    
==Definition of the Double Integral==
 
==Definition of the Double Integral==
SkipCaptcha, Automoderated users, edit
3,266

edits

Navigation menu